N16-TLT9

* N520-001-H005 (N16-TLT9) DRAWING NO. 41285786-001-01 PAGE 2

0051 * 0052 * THIS PROGRAM WILL OPERATE ON A STANDARD H316, DDP-416 OR DDP-516 0053 * WITH THE HONEYWELL OPTIONS 316/416/516-53 OR 316/416/516-55 OR 0054 * EOM 2321 ON THE LATTER 0055 * 0056 * 0057 * STORAGE 0058 * 0059 * 2730 (OCTAL) ('144 - '3073) 0060 * 1496 (DECIMAL) 0061 * 0062 * 0063 * USE 0064 * 0065 * COMPUTER OPERATION 0066 * 0067 * 1. TURN ASR ON-LINE AND SET MODE SWITCH TO *KT* ON 0068 * ASR-35. 0069 * 0070 * 2. LOAD THE SELF-LOADING SYSTEM TAPE OF N16-TLT9. 0071 * 0072 * 3. MASTER CLEAR, SET P-REGISTER = '1000, SELECT RUN MODE 0073 * AND THEN PRESS THE CONSOLE START BUTTON. 0074 * 0075 * 4. THE PROGRAM TYPES OUT THE PROGRAM TITLE FOLLOWED BY 0076 * THE CENTRAL PROCESSOR TYPE (I.E. DDP-416, DDP-516 OR 0077 * H316). THIS WILL ONLY BE OUTPUT FOR THE FIRST RUN 0078 * AFTER THE PROGRAM HAS BEEN LOADED. THE PROGRAM THEN 0079 * TYPES "ENTER A-REGISTER SETTING - PRESS START'. 0080 * 0081 * 5. WHEN THE PROGRAM HALTS, THE TEST SELECTION SHOULD 0082 * BE MADE BY SELECTING ONE OF THE FOUR HIGH ORDER BITS 0083 * OF THE A-REGISTER. N.B. THE SETTINGS MAY BE CHANGED 0084 * DURING THE COURSE OF THE PROGRAM BY PRESSING THE 0085 * START BUTTON THIS WILL GENERATE AN INTERRUPT WHICH 0086 * WILL ULTIMATELY CAUSE THE COMPUTER TO HALT. AFTER THE 0087 * SETTING HAS BEEN CHANGED, PRESS THE START BUTTON ONCE 0088 * AND THE COMPUTER WILL CONTINUE THE RUNNING OF THE 0089 * PROGRAM ACCORDING TO THE NEW SETTING. 0090 * 0091 * KEYBOARD INPUT 0092 * 0093 * AFTER PRINTING 'KEYBOARD INPUT' FOLLOWED BY CR, LF, CR, LF, 0094 * THE PROGRAM WILL WAIT FOR THE ENTRY OF CHARACTERS. UP TO 72 0095 * ALPHA-NUMERIC CHARACTERS, PUNCTUATION MARKS ETC. (I.E. 0096 * 'PRINTING CHARACTERS'), WILL BE ACCEPTED ALONG WITH BELL, 0097 * LINE FEED (LF), CARRIAGE RETURN (CR), CONTROL N (FOR SHIFT 0098 * INTO BLACK) AND CONTROL O (FOR SHIFT INTO RED). INPUT MAY BE 0099 * TERMINATED AFTER ANY ENTRY BY PRESSING THE CARRITAGE-RETURN 0100 * KEY.