O16-DPT9 rev B

* 0520-001-H002 (O16-DPT9) DRAWING NO. 41285751-001-02 PAGE 2

0051 * PURPOSE 0052 * 0053 * TO TEST THE DIGITAL INCREMENTAL PLOTTER, OPTION 316/516-2111/2112/ 0054 * 2113/2114, IN I/O BUS MODE 0055 * 0056 * 0057 * RESTRICTIONS 0058 * 0059 * THE PROGRAM WILL OPERATE ON A CONFIGURATION WITH AN H316 OR 0060 * DDP-516 COMPUTER. WITH A DIGITAL INCREMENTAL PLOTTER, AND 0061 * WITH EITHER AN ASR-33 OR AN ASR-35 0062 * 0063 * 0064 * STORAGE 0065 * 0066 * 3466 (OCTAL) 0067 * 1846 (DECIMAL) 0068 * 0069 * 0070 * USE 0071 * 0072 * COMPUTER OPERATION 0073 * 0074 * 1 LOAD THE SELF-LOADING SYSTEM TAPE OF O16-DPT9 0075 * 0076 * 2 CHECK THAT P='7632 0077 * 0078 * 3 MASTER CLEAR. P = '1000, START, IF H316 BEING USED, 0079 * SET SENSE SWITCH 1 0080 * 0081 * 4 TYPE IN THE APPROPRIATE ANSWERS TO THE PARAMETER 0082 * QUESTIONS 0083 * 0084 * AFTER THE LAST QUESTION IS ANSWERED THE PROGRAM GOES THROUGH 0085 * THE INITIALISATION ROUTINE AND THEN THE QUESTION 'TEST NO?' 0086 * IS ASKED 0087 * 0088 * 5 TYPE IN THE REQUIRED ANSWER (IF THE ANSWER IS NUMBER 2 0089 * OR LETTER A, SEE 6 BELOW) 0090 * 0091 * WHEN THE REQUIRED TEST NUMBER IS TYPED IN. THE PROGRAM 0092 * ATTEMPTS TO PLOT THE TEST PATTERN/PATTERNS AND THE 0093 * APPROPRIATE CONDITIONS ARE TESTED EITHER SUCCESSFULLY OR AN 0094 * ERROR CONDITION FOUND 0095 * 0096 * 6 IF THE ANSWER TO QUESTION 'TEST NO?' IS NUMBER 2 OR 0097 * LETTER A. SENSE SWITCH 4 MUST BE RESET BEFORE PATTERN 0098 * 2 IS COMPLETED IF OPTIONAL SPEED PRINTDUT IS REQUIRED. 0099 * OR SET IF NOT REQUIRED 0100 *