NAME: (PAL-AP) DOC. 70180311000 REV.H

* NAME: (PAL-AP) DOC. 70180311000 REV.H PAGE 2

0029 * 0030 * 0031 * STORAGE 0032 * 0033 * THIS PROGRAM OCCUPIES LESS THAN ONE SECTOR OF CORE. 0034 * 0035 * 0036 * USE 0037 * 0038 * PAL-AP IS DISTRIBUTED IN PAL MODE AND IN RELOCATABLE OBJECT FORMAT 0039 * 0040 * PAL MODE: 0041 * ALL PAL-FORMAT PROGRAMS MUST BE LOADED IN THE FOLLOWING 0042 * MANNER: 0043 * 1) THE KEY-IN LOADER (LOCATIONS 1-17) MUST BE MANUALLY 0044 * SET AS FOLLOWS: ASR DIGITRONICS 0045 * 0046 * 1 STA '57 010057 010057 0047 * 2 0CP '0001/4 030004 030001 0048 * 3 INA '1001/4 131004 131001 0049 * 4 JMP *-1 002003 002003 0050 * 5 SNZ 101040 101040 0051 * 6 JMP *-3 002003 002003 0052 * 7 STA 0 010000 010000 0053 * 10 IMA '1001/4 131004 131001 0054 * 11 JMP *-1 002010 002010 0055 * 12 LGL 8 041470 041470 0056 * 13 INA '0001/4 130004 130001 0057 * 14 JMP *-1 002013 002013 0058 * 15 STA* 0 110000 110000 0059 * 16 IRS 0 024000 024000 0060 * 17 SZE 100040 100040 0061 * 0062 * 2) PLACE THE LEADER PORTION OF THE PROGRAM IN THE PAPER 0063 * TAPE READER. SET THE P-COUNTER T0 000001 AND PRESS START. 0064 * (SEE NOTE FOR ASR USERS.) 0065 * 0066 * NOTE: WHEN USING AN ASR-33. MOMENTARILY PRESS THE START 0067 * SWITCH ON THE READER AFTER PRESSING THE COMPUTER START 0068 * BUTTON. WHEN USING AN ASR-35. SET THE MODE SWITCH 0069 * TO KT, PRESS THE CONTROL KEY (CTRL) AND THE Q KEY 0070 * SIMULTANEOUSLY. PRESS THE COMPUTER START BUTTON. AND 0071 * SET THE READER SWITCH TO RUN. 0072 * THE PROGRAM WILL SELF-LOAD FROM THIS POINT 0073 * TO THE CORE AREA FROM WHICH IT WAS PUNCHED. 0074 * 0075 * RELOCATABLE FORMAT 0076 * 1) LOAD THE PROGRAM AS ANY OTHER RELOCATABLE PROGRAM 0077 * 2) TO OUTPUT A PAL MODE TAPE, USE INSTRUCTIONS BELOW. 0078 * USING LOAD POINT FOR FIRST ADDRESS, AND LOAD POINT